# How to screen reverse reads from raw illumine data?

**URL:** <https://forum.mothur.org/t/how-to-screen-reverse-reads-from-raw-illumine-data/1363>\
**Category:** Commands in mothur\
**Created:** [May 25, 2013, 12:12pm UTC](https://forum.mothur.org/t/how-to-screen-reverse-reads-from-raw-illumine-data/1363 "2013-05-25T12:12:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![djshaofei](https://avatars.discourse-cdn.com/v4/letter/d/dec6dc/32.png) [@djshaofei](https://forum.mothur.org/u/djshaofei)\
**Post date:** [May 25, 2013, 12:12pm UTC](https://forum.mothur.org/t/how-to-screen-reverse-reads-from-raw-illumine-data/1363/1 "2013-05-25T12:12:31Z")

</div>

Hi Every body.

I am using illumine hi-seq pair-end 100 strategy to sequence my V6 amplicons (20 barcode primers were utilized to encode sample information).

Now the problem is thatï¼Œ after joining paired reads into contigs  
The contigs contained both “forward” and “reverse” sequence. Unlike 454, the pair reads seemed to be randomly sequenced in either direction in illumine hiseq.

I know mother have a simple command “reverse.seqs” to reverse compliment reads that are in reverse direction with 5-\>3 16S RNA gene.

But how to screen out the reverse contigs from large raw data.

  
Regards

---

<div class="post-metadata">

**Author:** ![pschloss](https://yyz2.discourse-cdn.com/flex036/user_avatar/forum.mothur.org/pschloss/32/4_2.png) [@pschloss](https://forum.mothur.org/u/pschloss)\
**Post date:** [May 28, 2013, 11:30am UTC](https://forum.mothur.org/t/how-to-screen-reverse-reads-from-raw-illumine-data/1363/2 "2013-05-28T11:30:37Z")

</div>

Hmmm… I’m not sure how that would happen.

A couple of options…

1. When you run trim.seqs to remove the barcodes and primers, you can use the checkorient option ([http://www.mothur.org/wiki/Trim.seqs#checkorient](http://www.mothur.org/wiki/Trim.seqs#checkorient))
2. When you run align.seqs with flip=T the sequence will flip it into the correct orientation and in the next step it will be in the correct orientation.

---

<div class="post-metadata">

**Author:** ![djshaofei](https://avatars.discourse-cdn.com/v4/letter/d/dec6dc/32.png) [@djshaofei](https://forum.mothur.org/u/djshaofei)\
**Post date:** [June 6, 2013, 9:09am UTC](https://forum.mothur.org/t/how-to-screen-reverse-reads-from-raw-illumine-data/1363/3 "2013-06-06T09:09:42Z")

</div>

Thank you

I find RDP pipeline can fix this problem ether

just exchange the forward and reverse primer, RDP will separate the reads of different directions.
