# Cluster vs Cluster Split

**URL:** <https://forum.mothur.org/t/cluster-vs-cluster-split/1968>\
**Category:** Commands in mothur\
**Created:** [August 7, 2014, 1:41pm UTC](https://forum.mothur.org/t/cluster-vs-cluster-split/1968 "2014-08-07T13:41:02Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mothuruser1](https://avatars.discourse-cdn.com/v4/letter/m/da6949/32.png) [@Mothuruser1](https://forum.mothur.org/u/Mothuruser1)\
**Post date:** [August 7, 2014, 1:41pm UTC](https://forum.mothur.org/t/cluster-vs-cluster-split/1968/1 "2014-08-07T13:41:02Z")

</div>

I am currently processing MiSeq data and I noticed something interesting. I ran 20 samples using the traditional cluster method and then calculated bray Curtis between them. I also did this same process at the class, order, and species level with cluster.split (taxlevel 3,4,7 respectively). As expected, when going from traditional methods (what i presume is at the sequence level) to class level, the dissimilarities between libraries decreased. What I did not expect was that as you go to higher tax levels using the cluster split command, I was seeing decreasing dissimilarities, ending with the species level having the lowest dissimilarity values and the traditional cluster method having the highest. Can someone explain why this is happening? Am I losing information if I use the cluster.split command exclusively?  
Thank you!

---

<div class="post-metadata">

**Author:** ![pschloss](https://yyz2.discourse-cdn.com/flex036/user_avatar/forum.mothur.org/pschloss/32/4_2.png) [@pschloss](https://forum.mothur.org/u/pschloss)\
**Post date:** [August 8, 2014, 9:17pm UTC](https://forum.mothur.org/t/cluster-vs-cluster-split/1968/2 "2014-08-08T21:17:16Z")

</div>

Can you post the exact commands you are entering?

---

<div class="post-metadata">

**Author:** ![Mothuruser1](https://avatars.discourse-cdn.com/v4/letter/m/da6949/32.png) [@Mothuruser1](https://forum.mothur.org/u/Mothuruser1)\
**Post date:** [August 11, 2014, 12:46pm UTC](https://forum.mothur.org/t/cluster-vs-cluster-split/1968/3 "2014-08-11T12:46:19Z")

</div>

For the traditional method, I use the following two commands:

mothur \> dist.seqs(fasta=FILE.fasta, cutoff=0.30, processors=8)

mothur \> cluster(column=FILE.dist, name=File.names, method=average)

For the cluster split methods I use:

mothur \> classify.seqs(fasta=FILE.fasta, template=silva.file.fasta, taxonomy=silva.bacteria.silva.tax)

mothur \> cluster.split(fasta=File.fasta, count=File.count\_table, taxonomy=File.wang.taxonomy, splitmethod=classify, taxlevel=4, cutoff=0.03,processors=8)

With tax levels at 3, 4,and 7. Are those correct for the class, order, and species level?

---

<div class="post-metadata">

**Author:** ![pschloss](https://yyz2.discourse-cdn.com/flex036/user_avatar/forum.mothur.org/pschloss/32/4_2.png) [@pschloss](https://forum.mothur.org/u/pschloss)\
**Post date:** [August 13, 2014, 12:04pm UTC](https://forum.mothur.org/t/cluster-vs-cluster-split/1968/4 "2014-08-13T12:04:27Z")

</div>

I wouldn’t use the silva.bacteria.fasta taxonomy files - instead, i’d use the newer silva.nr\_119 files that i’ve posted to the wiki or the rdp or greengenes files. I also wouldn’t use a cutoff in the cluster.split step.

for cluster.split here are the levels…  
1=Kingdom  
2=Phylum  
3=Class  
4=Order  
5=Family  
6=Genus

No database has very reliable species-level names.
